Triple Tubes Titanium Electric Immersion Heater Metal 50mm Dia

480V 3P 18KW Titanium Deep Tank High Power Over The Side Electric Immersion Heater
 
SURPLUS metal heaters are designed for the demands of corrosive chemical heating, with a vast array of configurations available, such as open tank, screw plug and flange. We offer sizes of metal heater as small as 500 watts for laboratory environments and as large as 36,000 watts for industrial applications.
 
Specification:480V 3P 18kw
Material: Titanium
Hot zone: 900MM
Tube diameter: 50MM
With Thermal Protection
Vertical length: 1200 MM Standard,other size can do
** Three phases standard, single phase available.
 
Voltage and Power can do other size.
The vertical length can be longer or shorter.

 
Features:
1. It is made of titanium, zirconium, SUS304, SUS316 stainless steel seamless control, and the shape is divided into vertical and bottom heating "L", "Z".
2. Design the surface power of the heating tube according to the installation position, the nature of the chemical liquid, and the deposition characteristics of solid substances in the liquid.
3. Liquid heating, heating tube surface power 5.4W/Cm2, suitable for liquid heating with good fluidity and less solid deposition. After cooling, the liquid will not precipitate crystals on the surface of the electric heater.
4. The ø50mm pipe diameter series products are designed with low surface productivity and good durability, especially suitable for horizontal heating on circuit boards.
5. The voltage is 120V single-phase, 220V, 380V, 220V three-phase, 380V three-phase, and the power ranges from 0.5KW to 60KW. 6. All heaters can be matched with over-temperature protection switch or temperature probe.
 
How do I know what size immersion heater I need?
A. The only way to be certain of the length of your immersion heater is to measure from the underside of the brass boss to the end of the heating element. However if your immersion heater is fitted in the side wall of your hot water cylinder (horizontally) then it will usually have a length of between 11 and 16 inches.
 
How long does an immersion heater take to heat a tank of water?
1-2 hours
The immersion heater is connected to the mains electric via a cable and has its own on/off switch.
When the heater is turned on, electricity heats the metal element and this heat passes to the surrounding water.
It can take 1-2 hours for the water in the cylinder to reach your desired temperature.
 

FAQ
Q: Where is Surplus located?
A: Our office located in HongKong,Dongguan and Shantou City.Our factory located in Shenzhen.
Q: Can I buy direct?
A: Yes,you can buy from Surplus Directly.
Q: Do you manufacture your products in house?
A: Most of our products are manufactured in-house at our factory.Some accessory items are not.
Q: Can I get the riser on my L-shaped aquaculture heater longer/shorter?
A: Yes.There is no price difference for making a heater with a middle riser,but there maybe a cost adder for a longer riser.
Q: What Third Party Approvals do your products carry(CE?)
A: Almost all of our products are CE compliant.
Q: How late can you ship?
A: Normally 7 days after comfirmed the order.
PACKING & SHIPPING
In our company,various packing methods are adopted according to different product features,such as carton boxes,wooden case etc.For electroplating plant equipment ,we can discuss it together and choose the most suitable one.
As for shipment,different ways have their own advantage and disadvantage:
By sea: the cheapest,suitable for large amounts,but take more time
By Air: faster, more convenient, expensive
By Express: more flexiable, door to door, expensive
RELATED SPECIES

PTFE IMMERSION HEATER	PTC IMMERSION HEATER	QUARTZ IMMERSION HEATER
METAL HEAT EXCHANGERS	(PFA) HEAT EXCHANGERS	ANODE BASKET
PP TANKS	PP BARRELS	PP BAG FILTERS

OUR FACTORY

ENGINEER OFFICE	TOOLING DEPARTMENT	MACHING 1
MACHING 2	MACHING 3	MACHING 4

Company Advantage
For more than ten years, our company has specialized in the research and development and production of PCB and FPC electroplating equipment, electric heaters, cold heat exchangers, and coating on the surface of electroplating equipment. We have collected advanced technologies and processes at home and abroad for many years. With the practice and experience in the PCB industry, the quality, stability and reliability of the products are among the world's leading positions. Our company has passed ISO9001: 2008 quality management system certification and CQC: CE certification, is in line with the world, implements scientific management, and implements international quality standards.